How Much Does Pool Resurfacing Cost in Flower Mound, TX?
Flower Mound Pool Resurfacing sets out what pool resurfacing costs in Flower Mound, Texas, from published figures: typical Dallas prices for 2026 average $11,341, with most homeowners spending $6,186 to $15,465; the same figures name the pool's size, its finish and the type of pool as the main drivers.
These are published averages and other companies' ranges, not our prices. Below they are broken out by finish and pool size, with the costs that come with the job and the Town of Flower Mound's own fees and water rates. A firm number needs a look at your pool, and the estimate is free.
Call or request a free estimate any time, 24/7
What drives pool resurfacing cost
The size of the pool
A finish is priced by the surface it covers. National calculators for September 2026 start the average at $6.65 to $7.93 a square foot to resurface a pool. National figures for 2026 also sort jobs by size without fixing the sizes: $4,000 to $8,000 for basic resurfacing of a small pool, $6,000 to $15,000 for a medium one and $10,000 to $25,000 or more for a large one.
The finish you choose
Plaster sits at the low end and tile at the top, with quartz, pebble and glass bead between them; the next section has the area's figures for each.
Prep before the new finish
Where the old surface has to be chipped out or repaired before the new one goes on, typical Texas figures for 2026 add $1,000 to $3,000 to a replaster.
Call or request a free estimate any time, 24/7.
(469) 526-3886
Pool resurfacing prices by finish
- All-tile interior
- $15,000–$40,000+
- Glass bead
- $10,000–$18,000
- Pebble, such as Pebble Tec or Pebble Sheen
- $8,000–$15,000+
- Quartz
- $6,500–$10,000
- Plaster, colored or tinted
- $5,000–$8,000
- Plaster, standard white (15,000–25,000 gallons)
- $4,000–$7,000
Published 2026 averages and other companies’ ranges for the Dallas–Fort Worth area, not our prices; your price follows a look at your pool.
Measured per 1,000 square feet of pool surface, Dallas figures for 2026 run $1,547 to repaint, $5,671 to replaster, $6,702 for an aggregate finish and $30,930 for tile. The two plaster rows are what pool replastering covers, and a pebble pool finish sits near the top of the range, below glass bead and tile.
Two finishes sit outside the ticket. National averages for 2025 price pool paint, most often epoxy, at $1 to $2 a square foot and give it a life of only 5 to 7 years. A fiberglass pool is refinished rather than plastered, and national averages for 2026 put resurfacing or recoating one at $6,000 to $15,000.
Call or request a free estimate any time, 24/7.
(469) 526-3886Costs around the resurfacing job
Draining, cleaning and start-up chemicals
Dallas figures for 2026 put draining a pool at $180 to $232 and cleaning it at about $258 on average. A one-time chemical balancing service runs $150 to $350 by national averages for 2025. Check what a quoted figure covers: the 2025 national resurfacing average of $6,000 to $15,000, for one, prices the resurfacing alone, not refilling the pool.
Refill water at the Town's rates
From October 1, 2026, Ordinance No. 33-26 bills water in monthly blocks after the first 2,000 gallons, with $8.65 per 1,000 gallons for use between 15,001 and 50,000 gallons. At that rate, refilling a 15,000-gallon pool comes to $129.75 and a 25,000-gallon pool to $216.25, but only if the household's other use that month has already passed 15,000 gallons; with less other use, part of the fill bills at the $5.62 or $7.60 block rates instead. Those sums leave out the $49.46 monthly minimum for a 3/4-inch or 5/8-inch meter, sewer charges and any trucked water. The Town sets each home's yearly sewer charge from its average water use in December, January and February, and its rate page doesn't say how a pool fill is treated. Rates change by ordinance, so check them with the Town before the pool is drained.
Waterline tile in the same drain-down
Targeted waterline tile repair runs $15 to $30 a linear foot by typical Dallas–Fort Worth figures for 2026, and with 80 to 120 linear feet of waterline on a typical pool, replacing it all usually comes to $1,200 to $3,600. National averages for 2026 put tile line replacement during a resurfacing job at $2,000 to $5,000 or more.
Town permit fees
The Town's pool code is the 2024 International Swimming Pool and Spa Code (Ordinance No. 31-25), which lists replastering or resurfacing an existing pool or spa as work needing no permit; Town amendments still require one to alter or repair a pool, so check with Building Inspections before work starts. Its building fee schedule from October 1, 2026 has no line for resurfacing; permitted pool work is priced by the job, at $430 for an in-ground pool and $250 for a spa or above-ground pool, plus a $120 plan review that comes off the permit fee on approval and a drainage inspection fee that may apply. Whoever pulls a permit registers as a contractor with the Town, at $40 a year for a general contractor.
Call or request a free estimate any time, 24/7.
(469) 526-3886When resurfacing grows into a remodel
Replacing tile and coping with the finish, or changing the pool itself, moves the job into pool remodeling prices. Typical Dallas–Fort Worth figures for 2026 sort most remodels into three bands: $5,000 to $12,000 for tile and coping, $10,000 to $25,000 for tile, coping and a new surface, and $25,000 to $80,000 or more once stonework, fire features or a kitchen are added. Dallas figures for 2026 average a pool remodel at $9,829, with a range of $5,209 to $14,520.
Call or request a free estimate any time, 24/7.
(469) 526-3886Weighing price against surface life
The National Plasterers Council gives white plaster 5 to 8 years and pebble 12 to 18, so the finishes that cost more up front also last longer. One published rule of thumb from 2026 sets a repair against a full job: a $600 professional patch that buys two more seasons is about $300 a year, while a $6,000 replaster lasting ten years works out to roughly $600 a year but resets the whole surface.
Call or request a free estimate any time, 24/7.
(469) 526-3886Pool resurfacing cost questions
How much does it cost to resurface a 20,000 gallon pool?
Typical Dallas–Fort Worth figures for 2026 price a pool of 15,000 to 25,000 gallons, which takes in 20,000, at $4,000 to $7,000 for standard white plaster and $5,000 to $8,000 for colored or tinted plaster. Quartz, pebble and other aggregate finishes cost more, and draining, cleaning and the refill water come on top.
How much does it cost to resurface a gunite pool?
The National Plasterers Council's glossary counts gunite, or dry-mix shotcrete, as one of the concrete shells a finish goes on, so concrete-pool prices apply. Dallas figures for 2026 put resurfacing a concrete pool at roughly $6,702 per 1,000 square feet, or $13,403 for a 2,000-square-foot pool, and typical Dallas–Fort Worth figures from 2025 put replastering one at $6.50 to $8.00 a square foot, or $6,500 to $8,000 for a standard 1,000-square-foot pool.
Are draining, refilling and permits part of the price?
Not in the published figures. Typical Dallas–Fort Worth remodel prices for 2026 are quoted before draining and refilling, hauling away old material and any city permit, and national resurfacing averages for 2025 cover the resurfacing alone, not the refill. An estimate should list each one.
Free pool resurfacing estimates for your pool
We answer calls and estimate requests at any hour. Share the pool’s rough size, its finish now and the one you would like next.




